Document creation date: April 15th 2020
Author: Jan-Christoph Deinert (HZDR)
with contributions from Zhe Wang and Hao Chu

GENERAL INFORMATION
The datasets contained in this repository have been generated using the data acquisition (DAQ) system at the 
TELBE terahertz source at HZDR. The data contains timing and intensity information for every recorded shot
(pulse-resolved data acquisition). To generate easily readable data and to reduce file sizes the data was treated using 
LabView programs written by the TELBE team members. These programs do (i) sort the data points using the timing signal
(DataSorting_June2018.vi), and (ii) average the data with respect to time to reduce file size (binning_June2018.vi).
An alternate version of the averaging program (pyro_bins) was used in a part of the evaluation (see below) to consider
only data points within a specified intensity range.

More information on the measurement process and the DAQ system can be found here:
https://doi.org/10.1038/srep22256
https://dx.doi.org/10.1063/1.4978042
https://d-nb.info/1136021566/34

Further information can be obtained from Sergey Kovalev (s.kovalev@hzdr.de)
or Jan-Christoph Deinert (j.deinert@hzdr.de)

********************************************************************************************************************
DATASETS USED IN THE PUBLICATION

The measurements that are presented in the publication were measured during two beamtimes at the TELBE terahertz source:
1) June 2018
2) December 2018

The datasets are uniquely identified by their filename. Within each beamtime, datasets are numbered chronologically.
Filenames also include the date and time of the experiment. Filenumbers can appear twice, which indicates that 
the delay stage did two loops of the respective measurement with otherwise identical parameters.


These are the file numbers for the datasets used to generate each individual figure:

Fig. 1(a): 053
Fig. 1(b): 038
Fig. 1(e): 033, 038, 045, 051, 053
Fig. 1(f): 025-031

Fig. 2(a)(c) 073-084 (LSCO) and 203-219 (DyBCO) during our beamtime in June 2018.
Fig. 2(b): 087-090

Fig. 3(a)(d): 032-053
Fig. 3(b)(e): 178-200
Fig. 3(c)(f): 018-032 (measured in December 2018)

Fig. 4(c): same as those for Fig. 3 and additionally 117-131 (BSCCO)
Fig. 4(d): 048

For Figs. 2 (a)(b) the THz pulse intensity was considered for intensities in the range
of 0.65 V to 0.75 V as measured by a fast pyro detector.